O2k signal line

                  

---

O2k signal line

---

---

MitoPedia O2k and high-resolution respirometry: Oroboros Open Support 

---

Description

The O2k signal line is underneath the O2k status line. It shows, depending on the O2k series, on the left side the O2k number, the time of the experiment, the oxygen raw signal of each chamber, the block temperature, the barometric pressure, the Peltier power, the recorded amperometric and potentiometric raw signal, the enviromental (room) temperature and the signal from internal sensors recording the humidity and temperature of the electronics. On the right side of the O2k signal line the current user, the DatLab version and the O2k serial number are displayed.

Reference: MiPNet22.11 O2k-FluoRespirometer manual

Bioblast links: Oxygen signal - >>>>>>> - Click on [Expand] or [Collapse] - >>>>>>>

Specific

» Oxygen signal

» O2k signal line

O2k-Procedures

» Air calibration

» Zero calibration

» High signal at zero oxygen

» POS calibration - static

» POS calibration - dynamic

» DL-Protocols

» Oxygen sensor test

» Stirrer test

» Open chamber

» Closed chamber

MiPNet O2k-Procedures

» POS-calibration

» O2k-Manual: POS-service

» O2k-cleaning

» O2k-Series G and DatLab 6: Calibration

General

» Oxygen, dioxygen, O₂

» Oxygen calibration - DatLab

» Oxygen solubility

» Oxygen solubility factor

» Oxygen pressure

» Concentration

» Activity

» Pressure - Pascal

» Barometric pressure

» High-resolution respirometry

» OroboPOS

» Polarographic oxygen sensor

» MitoFit Quality Control System

» Sensitivity

Other keyword lists

» Keywords: Concentration and pressure

MitoPedia O2k and high-resolution respirometry: DatLab