Mark specifications - DatLab

From Bioblast
Jump to navigation Jump to search

Header ecosystem 2020.jpg

OROBOROS support
        O2k-Manual         O2k-Videosupport         O2k-Procedures         MitoPedia: O2k hardware         MitoPedia: DatLab         MitoPedia: SUIT         MitoPedia: O2k-Open Support        

Mark specifications - DatLab

Template NextGen-O2k.jpg
O2k-Open Support

MitoPedia O2k and high-resolution respirometry: O2k-Open Support 


The function Mark specifications is largely replaced by SUIT DL-Protocols and Instrumental DL-Protocols in DatLab 7.4. Mark specifications allow the user to rename Marks in the active plot and save/recall the settings. Rename marks individually by clicking into the horizontal bar, or use corresponding templates for renaming the entire sequence of marks.

Mark specifications (name, state, concentration and volume) are shown from the active plot. Define the template name and save template.
Select a Template, left click on preview from template, and rename all marks of the plot, including the state, concentration and volume.


Reference mark names in DatLab 7

Reference mark names Description SUIT protocol Reference
MiPNet08.09_IntactCells Coupling control protocol (ceCCP) in intact cells. 1ce;2ceOmy;3ceU- MiPNet08.09 CellRespiration

MiPNet10.04_IntactCells Coupling control protocol (ceCCP) in intact cells using TIP2k for automatic uncoupler titrations. 1ce;2ceOmy;3ceU- MiPNet10.04 CellRespiration

MiPNet21.06 RP1pce
MiPNet21.06 RP2pce
MiPNet21.06 RP1mt
MiPNet21.06 RP2mt
» Library of SUIT protocols MitoPedia: SUIT protocols



Click to expand or collaps
Bioblast links: Marks in DatLab - >>>>>>> - Click on [Expand] or [Collapse] - >>>>>>>

MitoPedia O2k and high-resolution respirometry: DatLab