Connect - DatLab: Difference between revisions

Latest revision as of 09:48, 14 May 2024

Connect - DatLab

MitoPedia O2k and high-resolution respirometry: O2k-Open Support

Description

DatLab 8: Connect DatLab to the O2k.

DatLab 7 : Connect to O2k

Reference: MitoPedia: DatLab

Last update: 2024-05-14

Connect DatLab 8 to the O2k. The O2k must be connected to the power source and to the laptop or PC where DatLab 8 is installed with the USB cable.

For more information and in case of integrated PC: MiPNet28.08 Oroboros O2k Series J manual

Abbreviation: Ctrl+Shift+C

MitoPedia O2k and high-resolution respirometry: DatLab

@@ Line 1: / Line 1: @@
-{{MitoPedia
+{{Technical support}}
-|description='''Connect to O2k''' connects DatLab with the O2k. Select the [[USB port]] (or [[Serial port]]) with the corresponding cable connecting your PC to the O2k. Select the subdirectory for saving the [[DatLab data file| DLD file]]. Then data recording starts with experimental time set at zero.
+{{MitoPedia without banner
-|info=[[MiPNet22.11 O2k-FluoRespirometer manual]]
+|description='''DatLab 8''': Connect DatLab to the O2k.
+'''DatLab 7''' : [[Connect to O2k - DatLab 7 | Connect to O2k]]
+|info=[[MitoPedia: DatLab]]
 }}
+ Last update: 2024-05-14
+[[File:O2kmenu.png|right|150px]]
+:::: '''Connect''' DatLab 8 to the O2k. The O2k must be connected to the power source and to the laptop or PC where DatLab 8 is installed with the [[USB port | USB cable]].
+:::: For more information and in case of integrated PC: [[MiPNet28.08 Oroboros O2k Series J manual]]
+:::: '''Abbreviation''': Ctrl+Shift+C
 {{MitoPedia O2k and high-resolution respirometry
 |mitopedia O2k and high-resolution respirometry=DatLab
 }}