O2k-NO Amp-Module
| Description | O2k-NO Amp-Module: 2 black PEEK stoppers for NO applications; 1 additional inlet (2.3 mm) for 2 mm shaft NO sensor; central titration port; conical bottom; with Volume-Calibration Rings (A and B); with 8 spare O-rings (O-ring\Viton\12x1 mm; two boxes). The NO sensor is not included. |
|---|---|
| Product ID | 12500-02 |
| Type | O2k, O2k-Module, MultiSensor, O2k-NO Amp-Module, Stopper, Catalogue |
| Link | NO Manual @OROBOROS |
| Image |  |
- The NO sensor (not included) is available from other companies, while we are in the process of development of improved high-resolution sensors.
- All O2k Core models are already equipped with the necessary electronics to record signals form additional amperometric electrodes. The requirements for connecting an addition amperometric electrode to the O2w electronics of older O2k models vary with the model and are discussed in detail in NO Manual @OROBOROS. The amperometric plug of the O2k will accept electrodes from the WPI 2mm electrodes series without any modification. It will usually be necessary to construct a suitable adapter for the cables of electrodes from different supplier.
- Amperometric Electrodes form WPI: Currently WPI offers 2 mm electrodes for measuring NO (ISO-NOP), H2O2 (ISO-HPO-2) and H2S (ISO-H2S-2). The 2 mm NO and H2O2 electrodes fit the Oroboros stopper described here. The H2S electrode should also fit the stopper but this has not been tested by Oroboros Instruments. Please not that Oroboros Instruments does not give any statements about the suitability of these electrodes for any particular application or even their quality. Electrodes have to be ordered directly from WPI.
References
Discussion: Talk:O2k-NO Module
