Talk:O2k-Open Support alert

Do you perform the leaky chamber test after chamber assembly?

After chamber reassembly you might experience a small leaky chamber only identified by a leaky chamber test- »Leaky chamber test«

Do you change the slope smoothing to 20 while running experiments with biological sample?

While running your experiment, especially during uncoupler titrations, it is important to decrease the slope smoothing in order to have a faster visualization of the titrations effect on respiration. - »Slope smoothing«

Do you know that you can use the Titration-Injection microPump (TIP2k) to perform an instrumental O₂ background on the O2k-sV-Module?

By adjusting the dithionite concentration to 2.5 mM, the instrumental O₂ background can be performed with specific settings for the O2k-sV-Module. - »O2k-sV-Module«

Do you know how a switch components approach can address your faulty specifications even after countless quality control tests?

Do not desperate if specifications given in the O2k-Manuals are not obtained. See how to perform a experimental savior troubleshooting.-»Switch components approach«

Do you know that a humid O2k-environment and/or liquid spillage may lead to a high raw signal [V]?

See how to clean and dry the electrical connections of the OroboPOS-Connector.-»Cleaning the electrical connections«