Search by property

This page provides a simple browsing interface for finding entities described by a property and a named value. Other available search interfaces include the page property search, and the ask query builder.

List of results

• Mitochondrial preparations  + ('''Mitochondrial preparations''' (mtprep) … '''Mitochondrial preparations''' (mtprep) are isolated mitochondria (imt), tissue homogenate (thom), mechanically or chemically permeabilized tissue (permeabilized fibers, pfi) or permeabilized cells (pce). In mtprep the plasma membranes are either removed (imt) or mechanically (thom) and chemically permeabilized (pfi), while mitochondrial functional integrity and to a large extent mt-structure are maintained in incubation media optimized to support mitochondrial physiological performance. According to this definition, submitochondrial particles (smtp) are not a mtprep, since mitochondrial structure is altered although specific mitochondrial functions are preserved.fic mitochondrial functions are preserved.)
• Buffer Z  + ('''Mitochondrial respiration medium, Buffer Z''', described by [http://bioblast.at/index.php/Perry_2011_Biochem_J Perry 2011 Biochem J] For composition and comparison see: [[Mitochondrial respiration media: comparison]])
• MiR05  + ('''Mitochondrial respiration medium, MiR05 … '''Mitochondrial respiration medium, MiR05''', developed for oxygraph incubations of [[mitochondrial preparations]]. Respiration of [[living cells]] may be assessed in MiR05 by adding pyruvate (P) as an external source. [[MiR06]] = MiR05 + catalase.</br>[[MiR05Cr]] = [[MiR05]] + creatine.[[MiR05]] + creatine.)
• MiRK03  + ('''Mitochondrial respiration medium, MiRK03''', modified after a medium described by [[Komary 2010 Biochim Biophys Acta]], intended for use as medium for H2O2 production measurement with Amplex Red.)
• MitoOx2  + ('''Mitochondrial respiration medium, MitoO … '''Mitochondrial respiration medium, MitoOx2''', developed for oxygraph incubations of [[mitochondrial preparations]] to measure the H₂O₂ production. MitoOx2 yields a higher optical sensitivity and lower "drift" (oxidation of the fluorophore precurcor without H₂O₂ present) for Amplex UltraRed(R) than e.g. [[MiR05|MiR05]].[[MiR05|MiR05]].)
• MiR06  + ('''Mitochondrial respiration medium, [[MiPNet14.13 Medium-MiR06|MiR06]]''', developed for oxygraph incubations of [[mitochondrial preparations]]. MiR06 = MiR05 plus [[catalase]]. MiR06Cr = MiR06 plus [[creatine]].)
• Molar mass  + ('''Molar mass''' ''M'' is the mass of a c … '''Molar mass''' ''M'' is the mass of a chemical compound divided by its amount-of-substance measured in moles. It is defined as ''M''_B = ''m''/''n''_B, where ''m'' is the total mass of a sample of pure substance and ''n''_B is the amount of substance B given in moles. The definition applies to pure substance. The molar mass allows for converting between the mass of a substance and its amount for bulk quantities. It is calculated as the sum of standard atomic weights of all atoms that form one entity of the substance.</br></br>The appropriate [[SI base units]] is kg·mol^-1. However, for historical as well as usability reasons, g·mol^-1 is almost always used instead.historical as well as usability reasons, g·mol^-1 is almost always used instead.)
• Monoamine oxidase  + ('''Monoamine oxidases''' are enzymes boun … '''Monoamine oxidases''' are enzymes bound to the outer membrane of mitochondria and they catalyze the oxidative deamination of monoamines. Oxygen is used to remove an amine group from a molecule, resulting in the corresponding aldehyde and ammonia. Monoamine oxidases contain the covalently bound cofactor [[FAD]] and are, thus, classified as flavoproteins.nd are, thus, classified as flavoproteins.)
• Myxothiazol  + ('''Myxothiazol''' Myx is an inhibitor of [[Complex III]] … '''Myxothiazol''' Myx is an inhibitor of [[Complex III]] (CIII). CIII also inhibits [[Complex I|CI]]. Myxothiazol binds to the Q_o site of CIII (close to cytochrome ''b''_L) and inhibits the transfer of electrons from reduced QH₂ to the Rieske iron sulfur protein.ons from reduced QH₂ to the Rieske iron sulfur protein.)
• N-ethylmaleimide  + ('''N-ethylmaleimide''' is an organic compound that is derived from maleic acid and blocks endogenous Pi transport.)
• NADH  + ('''NAD⁺''' and '''NADH''': see [[Nicotinamide adenine dinucleotide]].)
• NADH calibration - DatLab  + ('''NADH calibration''')
• NS e-input  + ('''NS e-input''' or the [[NS-pathway control state]] … '''NS e-input''' or the [[NS-pathway control state]] is electron input from a combination of substrates for the [[N-pathway control state]] and [[S-pathway control state]] through Complexes [[CI]] and [[CII]] simultaneously into the [[Q-junction]]. NS e-input corresponds to [[TCA cycle]] function ''in vivo'', with [[convergent electron flow]] through the [[Electron transfer pathway]]. In [[Mitochondrial preparations|mt-preparations]], NS e-input requires addition not only of NADH- (N-) linked substrates (pyruvate&malate or glutamate&malate), but of succinate (S) simultaneously, since [[metabolite depletion]] in the absence of succinate prevents a significant stimulation of S-linked respiration. For more details, see: [[Additive effect of convergent electron flow]].[[Additive effect of convergent electron flow]].)
• Nagarse  + ('''Nagarse''' is a broad specifity proteas … '''Nagarse''' is a broad specifity protease from bacteria used to promote breakdown of the cellular structure of "hard" tissues such as skeletal muscle or heart mucsle that cannot be homogenized easily without treatment with a protease. Nagarse is frequently used in protocols for isolating mitochondria from muscle tissue.isolating mitochondria from muscle tissue.)
• Nicotinamide adenine dinucleotide  + ('''Nicotinamide adenine dinucleotide''', N … '''Nicotinamide adenine dinucleotide''', NAD⁺ and NADH (pyridine nucleotide coenzymes, NAD and NADP), is an oxidation-reduction coenzyme (redox cofactor; compare [[FADH2 |FADH₂]]). In the [[NADH electron transfer-pathway state]] fuelled by type N-substrates, mt-matrix dehydrogenases generate NADH, the substrate of [[Complex I]] (CI). The reduced N-substrate RH₂ is oxidized and NAD⁺ is reduced to NADH,:::: RH₂ + NAD⁺ → NADH + H⁺ + RThe mt-NADH pool integrates the activity of the [[TCA cycle]] and various matrix dehydrogenases upstream of CI, and thus forms a junction or funnel of electron transfer to CI, the [[N-junction]] (compare [[F-junction]], [[Q-junction]]). NAD⁺ and NADH are not permeable through the [[Mitochondrial inner membrane|mt-inner membrane]], mtIM. Therefore, an increase of mitochondrial respiration after the addition of NADH may indicate an alteration of the mtIM integrity. Cytosolic NADH is effectively made available for mitochondrial respiration through the [[malate-aspartate shuttle]] or [[Glycerophosphate_dehydrogenase_Complex|glycerophosphate dehydrogenase Complex]].Glycerophosphate_dehydrogenase_Complex|glycerophosphate dehydrogenase Complex]].)
• Nitric oxide synthase  + ('''Nitric oxide synthase''', NOS, catalyzes the production of nitric oxide (NO•), which is a [[reactive nitrogen species]]. There are four types of NOS: neuronal NOS (nNOS), endothelial NOS (eNOS), inducible NOS (iNOS) and mitochondrial NOS (mtNOS).)
• Normalization of rate  + ('''Normalization of rate''' (respiratory r … '''Normalization of rate''' (respiratory rate, rate of hydrogen peroxide production, growth rate) is required to report experimental data. Normalization of rates leads to a diversity of formats. Normalization is guided by physicochemical principles, methodological considerations, and conceptual strategies. The challenges of measuring respiratory rate are matched by those of normalization. Normalization of rates for: (''1'') the number of objects (cells, organisms); (''2'') the volume or mass of the experimental sample; and (''3'') the concentration of mitochondrial markers in the instrumental chamber are sample-specific normalizations, which are distinguished from system-specific normalization for the volume of the instrumental chamber (the measuring system). Metabolic ''flow'', ''I'', per [[Count |countable]] object increases as the size of the object is increased. This confounding factor is eliminated by expressing rate as sample-mass specific or sample-volume specific ''flux'', ''J''. [[Flow]] is an [[extensive quantity]], whereas [[flux]] is a [[specific quantity]]. If the aim is to find differences in mitochondrial function independent of mitochondrial density, then normalization to a [[mitochondrial marker]] is imperative. [[Flux control ratio]]s and [[flux control efficiency |flux control efficiencies]] are based on internal normalization for rate in a reference state, are independent of externally measured markers and, therefore, are statistically robust. and, therefore, are statistically robust.)
• Normothermia  + ('''Normothermia''' in endotherms is a stat … '''Normothermia''' in endotherms is a state when body core temperature is regulated within standard limits. In humans, normothermia is considered as a body temperature of 36.4 to 37.8 °C. Normothermia, however, has a different definition in the context of [[ectotherms]].</br>» [[Normothermia#Normothermia:_from_endotherms_to_ectotherms | '''MiPNet article''']]Normothermia#Normothermia:_from_endotherms_to_ectotherms | '''MiPNet article''']])
• Nuclear respiratory factor 1  + ('''Nuclear respiratory factor 1''' is a transcription factor downstream of [[Peroxisome proliferator-activated receptor gamma coactivator 1-alpha|PGC-1alpha]] involved in coordinated expression of [[nDNA]] and [[mtDNA]].)
• O-ring\Viton\12x1 mm  + ('''O-ring\[[Viton]] … '''O-ring\[[Viton]]\12x1 mm''', for PVDF or PEEK O2k-Stoppers, box of 4 as spares.</br></br>Two spare boxes of this product are standard components of the [[O2k-Assembly Kit]] ([[O2k-FluoRespirometer]]) as well as the [[O2k-TPP+ ISE-Module]] and the [[O2k-NO Amp-Module]].[[O2k-NO Amp-Module]].)
• O-ring\Viton\16x2 mm  + ('''O-ring\[[Viton]]\16x2 mm''', mounted on the [[O2k-Chamber Holder sV]].)
• Oxygen calibration - DatLab  + ('''O2 calibration''' is the calibration in … '''O2 calibration''' is the calibration in DatLab of the oxygen sensor. It is a prerequisite for obtaining accurate measurements of respiration. Accurate calibration of the oxygen sensor depends on (''1'') equilibration of the incubation medium with air oxygen partial pressure at the temperature defined by the experimenter; (''2'') zero oxygen calibration; (''3'') high stability of the POS signal tested for sufficiently long periods of time; (''4'') linearity of signal output with oxygen pressure in the range between oxygen saturation and zero oxygen pressure; and (''5'') accurate oxygen solubility for aqueous solutions for the conversion of partial oxygen pressure into oxygen concentration. The standard oxygen calibration procedure is described below for high-resolution respirometry with the calibration routine using instrumental calibration DL-Protocols in [[DatLab]].[[DatLab]].)
• O2k repair  + ('''O2k repair''' of defective hardware may … '''O2k repair''' of defective hardware may require replacement of spare parts. Some electronic or mechanical defects may be solved only by repair of the O2k in the electronics workshop of Oroboros Instruments, ''e.g.'', a defective Peltier unit (temperature control).ective Peltier unit (temperature control).)
• O2k status line  + ('''O2k status line''' is found above the [[O2k signal line]] … '''O2k status line''' is found above the [[O2k signal line]]. It contains information about the chamber label, O2 calibration, amperometric calibration, potentiometric calibration, the [[block temperature]], the [[illumination]] in chambers, the TIP2k status and the [[Automatic pan]].[[Automatic pan]].)
• O2k  + ('''O2k''' - [[Oroboros O2k]]: the modular system for [[high-resolution respirometry]].)

• O2k-Amperometric OroboPOS Twin-Channel  + ('''O2k-Amperometric OroboPOS Twin-Channel' … '''O2k-Amperometric OroboPOS Twin-Channel''': Two-channel variable polarization voltage; current/voltage converter for the polarographic oxygen sensor (POS); amplifyer with digital gain settings (1x, 2x, 4x, 8x); A/D converter; output in the range -10 V to 10 V. Integral component of the [[O2k-Main Unit]].[[O2k-Main Unit]].)
• O2k-Barometric Pressure Transducer  + ('''O2k-Barometric Pressure Transducer''', … '''O2k-Barometric Pressure Transducer''', A/D converter and digital output to DatLab for continuous recording of [[barometric pressure]] [kPa or mmHg], integrated into the air calibration of the POS ([[MiPNet06.03 POS-calibration-SOP]]). Integral component of the [[O2k-Main Unit]]. The warranty on the accuracy of the signal obtained from the O2k-Barometric Pressure Transducer expires within three years.ure Transducer expires within three years.)
• O2k-Electromagnetic Stirrer Twin-Control  + ('''O2k-Electromagnetic Stirrer Twin-Contro … '''O2k-Electromagnetic Stirrer Twin-Control''' for smooth rotation of the [[Stirrer-Bar\white PVDF\15x6 mm|stirrer bars]] in the two [[O2k-chamber]]s; with slow-start function to prevent decoupling of the stirrer bar; regulated stirrer speed in the range of 100 to 800 rpm (decoupling may occur at higher stirrer speeds), independent for the two O2k-Chambers; automatic events sent to DatLab when the stirrer is switched on/off or when the rotation seed is changed by the experimenter. Integral component of the [[O2k-Main Unit]].[[O2k-Main Unit]].)
• O2k-Main Power Cable  + ('''O2k-Main Power Cable''', for connecting the main unit to the power supply.)
• O2k-Peltier Temperature Control  + ('''O2k-Peltier Temperature Control''': Bui … '''O2k-Peltier Temperature Control''': Built-in electronic thermostat controlling temperature for two [[O2k-chamber]]s in the range of 4 to 47 °C; ±0.002 °C (at room temperature). Continuous recording of the O2k-Copper Block temperature with DatLab. Temperature change from 20 to 30 °C within 15 min; cooling from 30 to 20 °C within 20 min. Integral component of the [[O2k-Main Unit]]. The electronic temperature control of the O2k replaced the conventional water jacket.2k replaced the conventional water jacket.)
• Obesity  + ('''Obesity''' is a disease resulting from … '''Obesity''' is a disease resulting from excessive accumulation of body fat. In common obesity (non-syndromic obesity) excessive body fat is due to an obesogenic lifestyle with lack of physical exercise ('couch') and caloric surplus of food consumption ('potato'), causing several comorbidities which are characterized as preventable non-communicable diseases. Persistent [[body fat excess]] associated with deficits of physical activity induces a weight-lifting effect on increasing muscle mass with decreasing mitochondrial capacity. Body fat excess, therefore, correlates with [[body mass excess]] up to a critical stage of obesogenic lifestyle-induced [[sarcopenia]], when loss of muscle mass results in further deterioration of physical performance particularly at older age.cal performance particularly at older age.)
• OctGM  + ('''OctGM''': [[Octanoylcarnitine]] & [[Glutamate]] & [[Malate]]. '''MitoPathway control state:''' [[FN]] '''SUIT protocols:''' [[SUIT-015]], [[SUIT-016]], [[SUIT-017]])
• OctGMS  + ('''OctGMS''': [[Octanoylcarnitine]] &[[Glutamate]] & [[Malate]]& [[Succinate]]. '''MitoPathway control state:''' [[FNS]] '''SUIT protocols:''' [[SUIT-016]], [[SUIT-017]])
• OctM pathway control state  + ('''OctM''': [[Octanoylcarnitine]] … '''OctM''': [[Octanoylcarnitine]] & [[Malate]].</br></br>'''MitoPathway control state:''' F</br></br>'''SUIT protocols:''' [[SUIT-002]], [[SUIT-015]], [[SUIT-016]], [[SUIT-017]]</br></br>Respiratory stimulation of the [[Fatty acid oxidation pathway control state| FAO-pathway]], F, by [[fatty acid]] FA in the presence of [[malate]] M. Malate is a [[NADH Electron transfer-pathway state |type N substrate]] (N), required for the F-pathway. In the presence of [[Malate-anaplerotic pathway control state|anaplerotic pathways]] (''e.g.'', [[Malic enzyme|mitochondrial malic enzyme, mtME]]) the F-pathway capacity is overestimated, if there is an added contribution of NADH-linked respiration, F(N) (see [[SUIT-002]]). The FA concentration has to be optimized to saturate the [[Fatty acid oxidation pathway control state| FAO-pathway]], without inhibiting or uncoupling respiration. Low concentration of [[malate]], typically 0.1 mM, does not saturate the [[N-pathway]]; but saturates the [[Fatty acid oxidation pathway control state |F-pathway]]. High concentration of [[malate]], typically 2 mM, saturates the [[N-pathway]].[[N-pathway]].)
• OctPGM pathway control state  + ('''OctPGM''': [[Octanoylcarnitine]] … '''OctPGM''': [[Octanoylcarnitine]] & [[Pyruvate]] & [[Glutamate]] & [[Malate]].</br></br>'''MitoPathway control state:''' [[FN]]</br></br>'''SUIT protocols:''' [[SUIT-002]]</br>:This substrate combination supports N-linked flux which is typically higher than FAO capacity (F/FN<1 in the OXPHOS state). In SUIT-RP1, PMOct is induced after PM(E), to evaluate any additive effect of adding Oct. In SUIT-RP2, FAO OXPHOS capacity is measured first, testing for the effect of increasing malate concentration (compare [[malate-anaplerotic pathway control state]], M alone), and pyruvate and glutamate is added to compare FAO as the background state with FN as the reference state.O as the background state with FN as the reference state.)
• OctPGMS pathway control state  + ('''OctPGMS''': [[Octanoylcarnitine]] … '''OctPGMS''': [[Octanoylcarnitine]] & [[Pyruvate]] & [[Glutamate]] & [[Malate]] & [[Succinate]].</br></br>'''MitoPathway control state:''' [[FNS]]</br></br>'''SUIT protocol:''' [[SUIT-001]], [[SUIT-002]], [[SUIT-015]]</br></br>This substrate combination supports convergent electron flow to the [[Q-junction]].[[Q-junction]].)
• OctPGMSGp pathway control state  + ('''OctPGMSGp''': [[Octanoylcarnitine]] … '''OctPGMSGp''': [[Octanoylcarnitine]] & [[Pyruvate]] & [[Glutamate]] & [[Malate]] & [[Succinate]] & [[Glycerophosphate]].</br></br>'''MitoPathway control state:''' FNSGp</br></br>'''SUIT protocol:''' [[SUIT-002]]</br></br>This substrate combination supports convergent electron flow to the [[Q-junction]].[[Q-junction]].)
• OctPM pathway control state  + ('''OctPM''': [[Octanoylcarnitine]] … '''OctPM''': [[Octanoylcarnitine]] & [[Pyruvate]] & [[Malate]].</br></br>'''MitoPathway control state:''' [[FN]]</br></br>'''SUIT protocol:''' [[SUIT-002]], [[SUIT-005]]</br></br>This substrate combination supports N-linked flux which is typically higher than FAO capacity (F/FN<0 in the OXPHOS state). In SUIT-RP1, PMOct is induced after PM(E), to evaluate any additive effect of adding Oct. In SUIT-RP2, FAO OXPHOS capacity is measured first, testing for the effect of increasing malate concentration (compare [[malate-anaplerotic pathway control state]], M alone), and pyruvate is added to compare FAO as the background state with FN as the reference state. the background state with FN as the reference state.)
• OctPMS  + ('''OctPMS''': [[Octanoylcarnitine]] & [[Pyruvate]] & [[Malate]] & [[Succinate]]. '''MitoPathway control state:''' [[FNS]] '''SUIT protocol:''' [[SUIT-005]])
• Octanoate  + ('''Octanoate''' (octanoic acid). C₈H₁₆O₂ Common name: Caprylic acid.)
• Octanoylcarnitine  + ('''Octanoylcarnitine''' is a medium-chain fatty acid (octanoic acid: eight-carbon saturated fatty acid) covalently linked to [[carnitine]], frequently applied as a substrate for [[fatty acid oxidation]] (FAO) in [[mitochondrial preparations]].)
• Oligomycin  + ('''Oligomycin''' (Omy) is an inhibitor of … '''Oligomycin''' (Omy) is an inhibitor of [[ATP synthase]] by blocking its proton channel (Fo subunit), which is necessary for oxidative phosphorylation of ADP to ATP (energy production). The inhibition of ATP synthesis also inhibits respiration. In OXPHOS analysis, Omy is used to induce a [[LEAK respiration]] state of respiration (abbreviated as ''L''(Omy) to differentiate from ''L''(n), LEAK state in the absence of ADP).L''(n), LEAK state in the absence of ADP).)
• Optics  + ('''Optics''' are the components that are u … '''Optics''' are the components that are used to relay and focus light through a [[spectrofluorometer]] or [[spectrophotometer]]. These would normally consist of lenses and/or concave mirrors. The number of such components should be kept to a minimum due to the losses of light (5-10%) that occur at each surface. light (5-10%) that occur at each surface.)
• Ouabain  + ('''Ouabain''' (synonym: G-strophantin octa … '''Ouabain''' (synonym: G-strophantin octahydrate) is a poisonous cardiac glycoside. The classical mechanism of action of ouabain involves its binding to and inhibition of the plasma membrane Na+/K+-ATPase (sodium pump) especially at the higher concentrations. Low (nanomolar and subnanomolar) concentrations of ouabain stimulate the Na-K-ATPase.ions of ouabain stimulate the Na-K-ATPase.)
• Overfitting  + ('''Overfitting''' in statistics is the act … '''Overfitting''' in statistics is the act of mistaking noise for a signal. Overfitting makes a model look ‘’better’’ on paper but perform ‘’worse’’ in the real world. This may make it easier to get the model published in an academic journal or to sell to a client, crowding out more honest models from the marketplace. But if the model is fitting noise, it has the potential to hurt the science (quoted from [[Silver 2012 Penguin Press]]).nguin Press]]).)
• Overlay of plots - DatLab  + ('''Overlay of plots''' is defined in DatLa … '''Overlay of plots''' is defined in DatLab as selection of graph layouts showing identical plots from the two O2k-chambers in each graph. Overlay of plots is selected in [[Graph layout - DatLab |Graph layout]]. Superimposed traces of flux/flow from chambers A and B are then shown in Graph 1, and of concentration in chambers A and B in Graph 2.</br></br>There are basically two ways to superimpose traces recorded in different experiments: Export of the graphics via windows metafile or export of the data to e.g. a spreadsheet program.</br></br>If you export via wmf you also can manipulate the graphics but then usually the lines are broken up in different segments. This can be done in various programs like MS Word, Open Office Draw and even in MSPower Point, though this maybe is the worst program to do this. It is better to manipulate them in a proper program like OO Draw, convert it to an unchangeable picture and then import it to a presentation graphics. Anyway, when you import directly to Power point (or other programs), make sure not to import it as a "picture" but as a metafile. Also in some programs you might afterwards have to "break" it up, or accept a "conversion to a MS Draw object" or other similar linguistic inventions of the software gurus. For this option we suggest to do as much as possible directly in DatLab (setting colors, line widths, ..) using the options in "Plots"/"select plots" and "graph"/"options". </br></br>The “hardcore“ option is to export the data and import it into e.g. a spreadsheet program (MS Excel , OOCalc). It takes longer to have a simple overlay but gives you far less problems later and its easier to make changes later. To do this you can export your dataset "Export"/"Data to Textfile" and then go from there."Data to Textfile" and then go from there.)
• Oxalomalic acid  + ('''Oxalomalic acid''' is an inhibitor of a … '''Oxalomalic acid''' is an inhibitor of aconitase (and of cytoplasmic NADP-dependent isocitrate dehydrogenase). Aconitase mediates the isomerization of citrate to isocitrate as the first step in the [[TCA_cycle| TCA cycle]]. Oxalomalic acid has been used at 1 mM concentration and after 45 min of pre-incubation to inhibit aconitase in permeabilized rat Soleus muscle fibres, inhibiting the enzyme by 24% ([[Osiki 2016 FASEB J]]).[[Osiki 2016 FASEB J]]).)
• Oxidative stress  + ('''Oxidative stress''' results from an imb … '''Oxidative stress''' results from an imbalance between pro-oxidants and antioxidants shifting the equilibrium in favor of the pro-oxidants. This process can be due by an increment in pro-oxidants, by a depletion of antioxidant systems or both. Oxidative stress generates oxidative damage of proteins, lipids and DNA.dative damage of proteins, lipids and DNA.)
• Oxoglutarate dehydrogenase  + ('''Oxoglutarate dehydrogenase''' (α-ketogl … '''Oxoglutarate dehydrogenase''' (α-ketoglutarate dehydrogenase) is a highly regulated enzyme of the [[tricarboxylic acid cycle]]. It catalyses the conversion of oxoglutarate (alpha-ketoglutarate) to succinyl-CoA, reduces NAD⁺ to [[NADH]] and thus links to [[Complex I]] in the Electron transfer-pathway. OgDH is activated by low Ca²⁺ (<20 µM) but inactivated by high Ca²⁺ (>100 µM). OgDH is an important source of ROS.y high Ca²⁺ (>100 µM). OgDH is an important source of ROS.)
• Oxygen flux  + ('''Oxygen flux''', ''J''<sub>O<su … '''Oxygen flux''', ''J''_O₂, is a [[specific quantity]]. Oxygen [[flux]] is [[oxygen flow]], ''I''_O₂ [mol·s^-1 per system] (an [[extensive quantity]]), divided by system size. Flux may be volume-specific (flow per volume [pmol·s^-1·mL^-1]), mass-specific (flow per mass [pmol·s^-1·mg^-1]), or marker-specific (flow per mtEU). Oxygen flux (''e.g.'', per body mass, or per cell volume) is distinguished from oxygen flow (per number of objects, such as cells), ''I''_O₂ [mol·s^-1·x^-1]. These are different forms of [[normalization of rate]].lization of rate]].)